Home About For Your Home Frequently Asked Questions Warranty Contact Us

			SGS U.S. TESTING COMPANY INC. CLIENT: Advanced Basement Products 7017 Americana Parkway Reynoldsburg, OH 43068 Test Report No: 574488-R Date: May 15, 2006 SUBJECT: Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber. SAMPLE ID: Samples identified by the client as 6mm Enduro Board were received on 1/25/06 in good condition. TEST REQUESTED: The samples were tested in accordance with ASTM D3273-00. No revisions to this report will be allowed after 90 days of the report date. TEST DATE: 04/18/06 RESULTS: Results can be found on the following pages. CERTIFICATION: The tests reported here were conducted under the continuous direct supervision of SGS U.S. Testing Company Inc., Tulsa, OK. SIGNED FOR AND ON BEHALF OF SGS U.S. TESTING COMPANY INC. S. Scott Parkhurst Hydro Mechanical Laboratory Manager Jerry Murray Hydro Mechanical Laboratory Supervisor This report is issued by SGS U.S. Testing Company Inc. under its General Conditions for Testing Services, as printed on reverse side. SGS U.S. Testing's responsibility under this report is limited to proven negligence and will in no case be more than the amount of the testing fees. Except by special arrangement, samples are not retained by SGS U.S. Testing for more than 30 days. The results shown on this test report refer only to the sample(s) tested unless otherwise stated, under the conditions agreed upon. Anyone relying on this report should understand all of the details of the engagement. Neither the name, seals, marks nor insignia of SGS U.S. Testing may be used in any advertising or promotional materials without the prior written approval of SGS U.S. Testing. The test report cannot be reproduced, except in full, without prior written permission of SGS U.S. Testing Company Inc. Test Procedure and Results Procedure: Sample Pre-Conditioning: 4 days at 73.5+/-3.5,sup>oF and 50% RH Environmental Conditions: 90+/-2oF and 97% Humidity Exposure Time: 4 weeks Cultures: Aureobasidium pullulans, ATCC 9348 Aspergillus Niger, ATCC 6275 Penicillium, ATCC 9849 Soil: 25% Peat Moss, PH Level 6.8 Control Samples: Ponderosa Pine Sapwood Panels Gypsum Board Panels Ratings: 10 = No Growth 0 = Sample Completely Covered All ratings are based on ASTM D 3273 50 and 100 magnification photographic standards. The ratings determine amount of discoloration on a sample due to the presence of mold. SAMPLE ID: "6mm Enduro Board" Face Side Ratings:   Sample Week 1 2 3 1 10 10 10 2 10 10 10 3 9 10 10 4 8 10 10 Back Side Ratings:   Sample Week 1 2 3 1 10 10 9 2 9 9 8 3 9 9 9 4 8 9 8 *Product Average Rating: 9.291667		Fire Rating Report Mold Resistance Report Material Safety Data Sheet Foamed Plastic Report

A Division of Bryan - Your Basement Specialist Copyright ©2008 - The Basement Tuxedo of Baltimore